CCNA Recent Certified Cisco Academy Faisalabad Pakistan

Cisco Training Center Faisalabad

Cisco Networking Academy Faisalabad

Cisco Instructor at Cisco Academy Faisalabad

Cisco Expert Level Instructor Excellence Award

Cisco Expert Level Instructor Excellence Award 

Cisco Certified Expert Instructor Saeed Ahmad Faisalabad Pakistan

Benefits of VPNs , CCNA in Faisalabad

Cost savings 

•Enable organizations to use cost-effective, third-party Internet transport to connect remote offices and remote users to the main site.

Scalability 

•Enable organizations to use the Internet infrastructure within ISPs and devices, which makes it easy to add new users.

Compatibility with broadband technology 

•Allow mobile workers and telecommuters to take advantage of high-speed, broadband connectivity, such as DSL and cable, to gain access to the networks of their organization, providing workers flexibility and efficiency.

•Provide a cost-effective solution for connecting remote offices.

Security 

•Can include security mechanisms that provide the highest level of security by using advanced encryption and authentication protocols that protect data from unauthorized access.

Connect entire networks to each other, in the past, a leased line or Frame Relay connection was required to connect sites, but because most corporations now have Internet access, these connections can be replaced with site-to-site VPNs.

Internal hosts have no knowledge that a VPN exists.

Created when devices on both sides of the VPN connection are aware of the VPN configuration in advance.

End hosts send and receive normal TCP/IP traffic through a VPN gateway.

The VPN gateway is responsible for encapsulating and encrypting outbound traffic for all traffic from a particular site

The VPN gateway then sends it through a VPN tunnel over the Internet to a peer VPN gateway at the target site.

Upon receipt, the peer VPN gateway strips the headers, decrypts the content, and relays the packet toward the target host inside its private network.

Best Practices for VLAN Design

§One to three VLANs per access module and limit those VLANs to a couple of access switches and the distribution switches.

§Avoid using VLAN 1 as the "blackhole" for all unused ports. Use a dedicated VLAN separate from VLAN 1 to assign all the unused ports.

§Separate the voice VLANs, data VLANs, the management VLAN, the native VLAN, blackhole VLANs, and the default VLAN (VLAN 1).

§Avoid VTP when using local VLANs; use manually allowed VLANs on trunks.

§For trunk ports, turn off Dynamic Trunking Protocol (DTP) and configure trunking. Use IEEE 802.1Q rather than ISL because it has better support for QoS and is a standard protocol.

§Manually configure access ports that are not specifically intended for a trunk link.

§Prevent all data traffic from VLAN 1; only permit control protocols to run on VLAN 1 (DTP, VTP, STP BPDUs, PAgP, LACP, CDP, etc.).

§Avoid using Telnet because of security risks; enable SSH support on management VLANs.

Local VLANs CCNP SWITCH Exam Faisalabad

•The Campus Enterprise Architecture is based on the local VLAN model wherein users of geographically common switches are grouped into a single VLAN, regardless of the organizational function of the users.

•Local VLANs are generally confined to a wiring closet, as shown in the figure, and VLANs are local to one access switch which trunks to the distribution switch.

•If users move from one location to another in the campus, their connection changes to the new VLAN at the new physical location.

•In the local VLAN model, Layer 2 switching is implemented at the access level and routing is implemented at the distribution and core level, as shown in the figure, to enable users to maintain access to the resources they need.

§Create local VLANs with physical boundaries in mind rather than job functions of the users. 

§Local VLANs exist between the access and distribution layers.

§Traffic from a local VLAN is routed at the distribution and core levels. 

§Switches are configured in VTP transparent mode.

§Spanning tree is used only to prevent inadvertent loops in the wiring closet.

§One to three VLANs per access layer switch recommended.

Cisco CCNA CCNP Training Center in Faisalabad

Network Administrator

Minimum 2 to 4 years qualification experience in relevant field.

Salary Range: Rs. 25 to 45 K (according to skills/experience)+(free accommodation)

Qualification:

Having Bcs or equivalent education in Computer Science / Information Technology .
Qualified Microsoft Certified (CCNA etc) will be preferred 

Skills Required:                 Having Rich Knowledge and Hand on Experience of        

                                    Linux Servers, Microsoft servers (DC,ADC, TMG)

                                    Mail Server Mdeamon 

                                    Design and Manage LAN / VLAN/ WAN Infrastructure

Having good knowledge of switching and routing

Most of the course cover in CCNA R&S check the 4 modules cover Introduction , Routing and

switching LAN , VLAN , VTP , STP , Inter-VLAN routing , PPP , Frame relay , ACL , HSRP , VRRP, GLBP , NAT 

Definitely Career Institute Faisalabad provide the complete training for ccna 200-120 , ccna 640-554 , ccnp and mcse 2012 track cover all 5 major exam code. we also provide internship and jobs for students with the help of industry links and repute.

CCNA Security Classes in Faisalabad by Saeed Ahmad

Now a days Network Security and Devices prevention from unauthorized access is major issue in the world. Daily a lot of companies make expense to secure the network , password , data .

Career Institute Faisalabad offer CCNA 200-120 Routing and switching , CCNA Security IINS2.0 by Sir Saeed Ahmad certified CCSP and Certified CCNA Security Instructor only in Faisalabad having 8 years of teaching experience in the world.

CCNA in faisalabad only offers at cisco networking academy Career Institute with official course material , online contents , modules , quiz , participation , free packet tracer course and a lot of facilities by cisco networking academy faisalabad.

Upon completion of the CCNA Security course, students will be able to perform the following tasks:
● Explain network threats, mitigation techniques, and the basics of securing a network
● Secure administrative access on Cisco routers
● Secure administrative access with AAA
● Implement firewall technologies to secure the network perimeter
● Configure IPS to mitigate attacks on the network
● Describe LAN security considerations and implement endpoint and Layer 2 security features
● Describe methods for implementing data confidentiality and integrity
● Implement secure virtual private networks
● Implement an ASA firewall configuration using the CLI
● Implement an ASA firewall configuration and VPNs using ASDM
● Test network security and create a technical security policy