EtherChannel Configuration

EtherChannel Configuration

           Switch(config)#  interface range fa0/1 – 4 {we can use the range or single interface}

Switch(config-if)#  channel-group [1 – 6] mode [auto | desirable | on | active | passive]

This port-channel can be customized via the CLI:

           Switch(config)# interface port-channel[1 – 6]

           Switch(config-if)# switchport mode trunk {an example only}

However if we wish to view the operation we use the term “etherchannel”.

            Switch# show interface etherchannel

            Switch# show etherchannel [summary | load balance | port-channel]

EtherChannel Requirements CCNA

EtherChannel has specific requirements and additional platform (hardware) related requirements. A partial list is:

·         EtherChannel can have a maximum of eight physical interfaces per port-channel

·         All interfaces within the port-channel must have the same speed and duplex settings

·         An EtherChannel does not form if one interface is a Switch Port Analyzer (SPAN) port

·         An interface within a port-channel cannot be configured as a secure port (do not activate port security)

·         All interfaces within a port-channel must be assigned to the same access VLAN or if they are Dot1q trunks they must be assigned the same native VLAN

·         If interfaces are trunking then they must all have the same allowed range of VLANs

Catalyst 2960 switches can leverage a protocol to dynamically establish and maintain the EtherChannel bundle. The channel-group mode command allows you to decide if the EtherChannel group uses Port aggregation Protocol (PAgP), Link Aggregation Protocol (LACP), or to simply force the interface to channel without PAgP or LACP.  Forcing interfaces to channel may create problems if any interfaces have dissimilar configurations.  PAgP allows the switches to learn the capabilities of each interface assigned to an EtherChannel bundle and reliably activates interfaces of similar configuration to form a port-channel. PAgP transmits and receives messages on all interfaces in the EtherChannel bundle and restricts the PAgP traffic to the native VLAN if the ports are in trunking mode. LACP is similar in operation to PAgP and standards based while PAgP is Cisco proprietary.

Other local link protocols such as DTP, VTP, CDP, and STP still transmit and receive frames over a port-channel. STP only sends frames out the first interface in the port-channel and views the port-channel as a single physical port. Cisco uses Per-VLAN Spanning-Tree (PVST) and if the port-channel is a Dot1q trunk then multiple STP messages might require transmission (with appropriate Dot1q tags).

Spanning-tree reflects the increased bandwidth provided by EtherChannel. The default cost for a 100 Mbps link is 19 and if a port-channel is created that has only two 100 Mbps links the spanning-tree cost will be 9. If more physical ports are assigned to the port-channel the cost decreases. Note: the spanning-tree cost does not dynamically change when links go down or when a link is brought back up within the port-channel; the cost is calculated based on the number of ports assigned to the port-channel. 

Ata Ullah Saleem Cisco Certified

Ata Ullah CCNA Certificate

Cisco Academy Faisalabad CCNA & CCNP Training

CCNA Recent Certified Cisco Academy Faisalabad Pakistan

Cisco Training Center Faisalabad

Cisco Networking Academy Faisalabad

Cisco Instructor at Cisco Academy Faisalabad

Cisco Expert Level Instructor Excellence Award

Cisco Expert Level Instructor Excellence Award 

Cisco Certified Expert Instructor Saeed Ahmad Faisalabad Pakistan

Benefits of VPNs , CCNA in Faisalabad

Cost savings 

•Enable organizations to use cost-effective, third-party Internet transport to connect remote offices and remote users to the main site.

Scalability 

•Enable organizations to use the Internet infrastructure within ISPs and devices, which makes it easy to add new users.

Compatibility with broadband technology 

•Allow mobile workers and telecommuters to take advantage of high-speed, broadband connectivity, such as DSL and cable, to gain access to the networks of their organization, providing workers flexibility and efficiency.

•Provide a cost-effective solution for connecting remote offices.

Security 

•Can include security mechanisms that provide the highest level of security by using advanced encryption and authentication protocols that protect data from unauthorized access.

Connect entire networks to each other, in the past, a leased line or Frame Relay connection was required to connect sites, but because most corporations now have Internet access, these connections can be replaced with site-to-site VPNs.

Internal hosts have no knowledge that a VPN exists.

Created when devices on both sides of the VPN connection are aware of the VPN configuration in advance.

End hosts send and receive normal TCP/IP traffic through a VPN gateway.

The VPN gateway is responsible for encapsulating and encrypting outbound traffic for all traffic from a particular site

The VPN gateway then sends it through a VPN tunnel over the Internet to a peer VPN gateway at the target site.

Upon receipt, the peer VPN gateway strips the headers, decrypts the content, and relays the packet toward the target host inside its private network.